Basic Info.
Model NO.
TK65/68 Series
Power Source
Electric
Controlling Mode
CNC
Automatic Grade
Automatic
Setting Mode
Floor-type
Precision
High Precision
Certification
CE
Condition
New
Boring Spindle Diameter
Φ130
RAM Section
380×400
Transport Package
Wooden Packing
Trademark
RICH
Origin
Dalian, China
Production Capacity
100 Set Per Week
Product Description
Milling Machine Boring Machine Floor Type Planer Type Table Type
Introduction of TK65/68 Series CNC Planer Type Milling And Boring Machine:
1. CNC Planer Type Milling and Boring Machines. Model TK6513B. TK6513B, TK6813, TH6813. TK6516B. TH6516B. TK6816. TH6816 are the advanced machine tools with large torque, high efficiency and high rigidity.
2. This series of machines are applicable to machine large or middle size housing components, frames and moulds. After the completion of one-time workpiece setup, the machine can automatically complete multiple operations, such as milling, boring, drilling, reaming, countering, tapping, etc. The machine is capable of seven axes control and simultaneous control on any four of them, it is also capable of circular interpolation and 3-D contoured surface machining. With the installation of accessories, such as milling heads and facing plates, the machine operation capability can be increased.
3. The Structure features of Series TK65 (without ram) Linear Guideways for Axes X and W and rectangular guideways along Axes Y andZ forced lubrication guideways for Axis B.
4. The Structure features of Series TK68 (with ram)-Linear Guideways lor Axis X, Hydrostatic Guideways for Axes Y, V and W. forced lubrication guideways for Axis B, guiding bar for Axis Z.
TK65/68 Series CNC Planer Type Milling And Boring Machine Structural Features:
T-shaped bed layout The worktable always moves on the horizontal bed, with sufficient rigidity and good precision retention; the spindle can be CNC fed 550mm, and the axial resistance is large, which can be used for strong cutting; PTFE guide rail plate, there are rolling elements on the side for guidance, the friction between the guide rails is small, and the positioning accuracy is high;
X, Z coordinate guide rails are equipped with stainless steel pull-plate type protective cover, Y direction has accordion type protective cover, dustproof and waterproof protection guide rails;
The rotary circular guide rail of the worktable adopts cast iron-PTFE guide rail plate, and the imported thrust bearing is installed inside for unloading, stable movement, high positioning accuracy, and the bearing capacity can reach 5000kg
Main shaft bearings and screw bearings are imported originals;
Each guide rail motion pair has an adjustable timing lubricating device to supply oil, which can ensure sufficient lubricating oil for each lubricating point;
Equipped with cooling device, water tray and screw-type chip conveyor; easy to remove chips;
Equipped with Siemens SINUMERIK 840D CNC system, AC spindle motor, AC feed servo motor and servo drive unit are imported original, advanced performance, safe and reliable
Introduction of TK65/68 Series CNC Planer Type Milling And Boring Machine:1. CNC Planer Type Milling and Boring Machines. Model TK6513B. TK6513B, TK6813, TH6813. TK6516B. TH6516B. TK6816. TH6816 are the advanced machine tools with large torque, high efficiency and high rigidity.
2. This series of machines are applicable to machine large or middle size housing components, frames and moulds. After the completion of one-time workpiece setup, the machine can automatically complete multiple operations, such as milling, boring, drilling, reaming, countering, tapping, etc. The machine is capable of seven axes control and simultaneous control on any four of them, it is also capable of circular interpolation and 3-D contoured surface machining. With the installation of accessories, such as milling heads and facing plates, the machine operation capability can be increased.
3. The Structure features of Series TK65 (without ram) Linear Guideways for Axes X and W and rectangular guideways along Axes Y andZ forced lubrication guideways for Axis B.
4. The Structure features of Series TK68 (with ram)-Linear Guideways lor Axis X, Hydrostatic Guideways for Axes Y, V and W. forced lubrication guideways for Axis B, guiding bar for Axis Z.
TK65/68 Series CNC Planer Type Milling And Boring Machine Structural Features:
T-shaped bed layout The worktable always moves on the horizontal bed, with sufficient rigidity and good precision retention; the spindle can be CNC fed 550mm, and the axial resistance is large, which can be used for strong cutting; PTFE guide rail plate, there are rolling elements on the side for guidance, the friction between the guide rails is small, and the positioning accuracy is high;
X, Z coordinate guide rails are equipped with stainless steel pull-plate type protective cover, Y direction has accordion type protective cover, dustproof and waterproof protection guide rails;
The rotary circular guide rail of the worktable adopts cast iron-PTFE guide rail plate, and the imported thrust bearing is installed inside for unloading, stable movement, high positioning accuracy, and the bearing capacity can reach 5000kg
Main shaft bearings and screw bearings are imported originals;
Each guide rail motion pair has an adjustable timing lubricating device to supply oil, which can ensure sufficient lubricating oil for each lubricating point;
Equipped with cooling device, water tray and screw-type chip conveyor; easy to remove chips;
Equipped with Siemens SINUMERIK 840D CNC system, AC spindle motor, AC feed servo motor and servo drive unit are imported original, advanced performance, safe and reliable
| Specification/Model | Unit | TK6513B/TH6513B | TK6813/TH6813 | TK6516B/TH6516B | TK6816/TH6816J |
| Boring Spindle Diameter | mm | φ130 | φ130 | φ160 | φ160 |
| Mining Spindle End Diameter | mm | φ221.44 | φ221.44 | φ280 | φ280 |
| Trable Travel | mm | 2500 | 2500 | 2500 | 2500 |
| Boring Spindle Travel | mm | 800 | 800 | 900 | 1000 |
| Ram Travel | mm | none;NA | 800 | none;NA | 1000 |
| Headstock Travel | mm | 2000 | 2000 | 3000 | 3000 |
| Column Travel | mm | 1000 | 1500 | 2000 | 2000 |
| Boring Spindle Taper | ISO 50 | ISO 50 | ISO 50 | ISO 50 | |
| Spindle Speed | r/min | 2-2000 | 2-2000 | 2-1500 | 2-1500 |
| Feed Rate of Table. Headstock am Column | r/min | 5-6000 | 5-8000 | 5-8000 | 5-6000 |
